Find The Lowest Price HERE

Linear WD500Z-1 Z-Wave 500-Watt Wall-Mount Dimmer Switch

• White. Z-Wave smart chips enable two-way RF communication among hundreds of Z-Wave-enabled devices using the Z-Wave international wireless standard.
• 500 Watts for control of permanently installed
  incandescent lamp fixtures only (not for control of
  receptacles)
• Fits In Standard J-box
• Up to 100 feet line of sight between the Controller
  and /or the closest Z-Wave Receiver Module
• Caution:- To reduce the risk of overheating and possible damage to other equipment, do not install to control a receptacle, a motor operated appliance, a fl uorescent lighting fi xture, or a
  transformer-supplied appliance, but only permanently installed incandescent lamp fixtures. Make sure the lamp(s) to be controlled directly from the dimmer receiver total no more than 500 watts.

Upgrade your home with Liner’s high tech Z-Wave automation products – we’re making lifestyle technology simple to install and use! The Linear WD500Z Z-Wave Wall Dimmer Switch is wired in place of a traditional overhead lighting wall switch or dimmer and allows wireless Z-Wave remote ON/OFF control of the lights using a remote, wall controller, or smart phone or tablet. The dimmer switch sports a small blue LED indicator lamp that shines when the switch is on, however it can be easily programmed

List Price: $ 35.93

Price: Too low to display

More Low Price 500 Watt Products

100% Pure Garcinia Cambogia Extract – Appetite Suppressant – Carb Blocker Capsules – 2100 MG – 90 Caps

Find The Lowest Price HERE

Linear WD500Z-1 Z-Wave 500-Watt Wall-Mount Dimmer Switch

• White. Z-Wave smart chips enable two-way RF communication among hundreds of Z-Wave-enabled devices using the Z-Wave international wireless standard.
• 500 Watts for control of permanently installed
  incandescent lamp fixtures only (not for control of
  receptacles)
• Fits In Standard J-box
• Up to 100 feet line of sight between the Controller
  and /or the closest Z-Wave Receiver Module
• Caution:- To reduce the risk of overheating and possible damage to other equipment, do not install to control a receptacle, a motor operated appliance, a fl uorescent lighting fi xture, or a
  transformer-supplied appliance, but only permanently installed incandescent lamp fixtures. Make sure the lamp(s) to be controlled directly from the dimmer receiver total no more than 500 watts.

Upgrade your home with Liner’s high tech Z-Wave automation products – we’re making lifestyle technology simple to install and use! The Linear WD500Z Z-Wave Wall Dimmer Switch is wired in place of a traditional overhead lighting wall switch or dimmer and allows wireless Z-Wave remote ON/OFF control of the lights using a remote, wall controller, or smart phone or tablet. The dimmer switch sports a small blue LED indicator lamp that shines when the switch is on, however it can be easily programmed

List Price: $ 31.13

Price: Too low to display

100% Pure Garcinia Cambogia Extract – Appetite Suppressant – Carb Blocker Capsules – 2100 MG – 90 Caps

Find The Lowest Price HERE

This home brew amp put out 3KW the first time it was fired up. After tuning and a few mods it eventually did 5KW on the 11 meter CB band. It was created for mobile use! The rig? A 1963 Ford pickup with a small block chevy under the hood, a Dodge rear axle and a datsun 4Cyl engine in the bed to run the 12KW Genset that powered the AMP. The only thing in the cab was a basic Cobra 40 Channel CB. There was a remote start for the 4Cyl genny and the amp could be online within a minute or so. The driver amp was a solid state 500 Watt brick if I recall correctly. The output tube was an Eimac 3CX5000. Video was shot May 19th 1989.

Frame MiniTec MTB front Subframe MiniTec flip front fiberglass hood Suspension & Wheels 13×6 MSW Minilight Wheels with 175 50 13 tires Wood and Picket wheel arches from England GAZ 40 way adjustable shocks front and rear MiniTec front Springs, height adjustable HiLo type Rear springs, height adjustable MiniTec front heim joint control arms — fully adjustable camber, caster and toe S Racer rear fully adjustable camber/caster setup Engine Honda Civic SiR B16A Buddy Club Spec III VTEC cams Buddy Club dual valve springs AEM adjustable cam gears Rebuilt head with all new valve guides and seals with 3 angle valve job. BLOX short run intake manifold (also needed to clear the firewall) Custom Intake arm with filter OBX stainless steel exhaust header MSD high silicon ignition wires Hondata 3000 VTEC computer chip. Transmission S80, 1999 5 Speed Acura GSR Transmission with smooth engagement in all gears (no grinding) Quaife Limited Slip Differential Upgraded 4.05 final Drive — rolls at 70mph at 3500 RPM — Very STREETABLE and hits VTEC at around 5500 RPM. Interior Skunk2 short shift kit B&M shift cover and base Momo Indy wood steering wheel from Japan (VERY RARE) Quick release steering wheel adaptor Acura Integra TypeR (ITR) front seats in GREAT condition (VERY RARE) Stewart Warner Speedo, Tach (10k limit), Water Temp, Oil Temp, Oil Pressure and Fuel Level Re upholstered rear seats, door panels, deck lid, dash and a NEW headliner SRacer peddles (gas, clutch, brake) Honda ignition …

100% Pure Garcinia Cambogia Extract – Appetite Suppressant – Carb Blocker Capsules – 2100 MG – 90 Caps