BR>
Find The Lowest Price HERE
Question by Luh Chris Cuz: Again Whats The Best Amp For My 2 12” 600 Watt Kenwood Tornaods?(So Much Writing I Couldnt Put Spaces In It)
Details On My Subs:
Nominal Input Power Rating: 600 W
Cone Style: Cone
Mounting Depth: 5.3 in
Speaker Configuration: Single Speaker
Diameter: 12 in
Nominal Impedance: 4 ohm
Cone Material: Polypropylene (Injection Molded)
General Features: Gold-Plated Terminals Vented pole piece
Magnet Weight: 42.3 oz
Sensitivity: 93 dB
Minimum Frequency Response: 25 Hz
Maximum Frequency Response: 800 Hz
Maximum Input Power Rating: 600 W
Thunder TA Series Class D Monoblock Car Amplifier
RMS Power Rating:
4 ohms: 150 watts x 1 chan.
2 ohms: 300 watts x 1 chan.
Max power output: 300 watts x 1 chan.
MOSFET power supply
Wired remote bass level control included
Thermal and short LED indicators
Tuned Bass EQ (0-12 dB bass boost at 40 Hz)
Adaptive Class D Technology: With MTX innovative approach, the amplifier’s switching energy is constantly changing and is moved away from FM radio frequency ranges as the amplifier’s load and output increases.
Thermal and short protection
StreetWires Connectors
Xtant Technologies Cooling (XTC) thermal-regulated, turbo-charged intercooler
Variable low-pass filter (at 80 or 120 Hz, 24 dB/octave)
CEA-2006 compliant amplifier
Dimensions: 12-11/16″L x 9-5/8″W x 2-1/2″H
4 or 8-gauge power and ground leads recommended. Contact us for information regarding a discount on a select amplifier kit when purchased together.
1-year Sonic Electronix warranty
Monoblock Class A/B Amplifier with Bass Level Control
RMS Power Ratings:
1 ohm: 600 watts x 1 channel
2 ohms: 300 watts x 1 channel
4 ohms: 150 watts x 1 channel
Hifonics New Illuminated Heat-Sink Design With Blue LED Light Pumps
Hifonics Blue Illuminated Logo
Maxxsonics Illuminated “M” End Panel Logo
Heavy-Duty Ultra-Fi” MOSFETS
Highly Efficient Super D-Class Amplifier Circuitry With Oversized MOSFET Output
Fully Adjustable Accu-Cross” Crossovers
±18dB Variable Bass Equalization @ 45Hz
180° Variable Phase Control (15 to 35Hz)
Dash-Mountable Bass Remote Control Included
Variable 24dB Subsonic Filter
Brutus Pulse Wave Modulated MOSFET EXVP (Exponential Vari-Power Supply)
Twin-Turbo Torroid Coil Design
HSMD Hifonics Surface Mount Design
Balance Line Inputs for our 18-Volt Line Drivers
RCA Line Output for Amplifier Daisy Chaining
Gold 4-Gauge Power Connectors
Dimensions: 9.84″L x 10.39″W x 2.63″H
1-year Techronics.com warranty
Kenwood KAC-8104D 1-Channel Car Audio Amplifier Power:
300 Watts x 1 @ 4 Ohm
500 Watts x 1 @ 2 Ohm
MOSFET power supply
LED power indicator
Tuned Bass EQ (0-18 dB bass boost at 40 Hz)
Speaker-level inputs with signal sensing for automatic turn-on)
Preamp RCA outputs
Short circuit, DC offset, overload, and thermal protection circuitry
Aluminum die cast heat sink
Built-in cooling fan
Gold-plated RCA level inputs
Gold-plated screw terminals
Variable low-pass filter (50-200 Hz, 24 dB/octave)
CEA-2006 compliant amplifier
Frequency response: 5-200 Hz
Subsonic Filter (15/25 Hz, 18 dB/ Octave)
THD: 0.8%
Dimensions: 11-1/16″ Width x 2-3/8″ Height x 9-7/8″ Depth
Kenwood KAC-8103D 1-Channel Car Audio Amplifier Class D Monoblock Amplifier
Maximum Output Power: 1000 watts
RMS Power Output:
300 watts x 1 channel @ 4 ohms
500 watts x 1 channel @ 2 ohms
2 ohm stable
Frequency Response: 5 Hz-200 Hz
Low-Pass Filter: 50 Hz-200 Hz, 24 dB/Octave
Variable Input Sensitivity: 200 mV – 5 V
Line Output Terminals for Extension
Infrasonic Filter: 15 Hz, 25 Hz, 18 dB/Octave
Bass Boost: 0-18 dB
Fuse Rating 40A x 1
Signal-to-Noise Ratio 85 dB
THD @ Rated RMS Power 1%
Dimensions: 11-1/4″ Length x 2-1/2″ Height x 12-1/2″ Width
1 Year Techronics Warranty!
Kicker 06ZX300.1 1-Channel Car Audio Amplifier RMS Power: 150W x 1 @ 4 ohms
RMS Power: 300W x 1 @ 2 ohms
THD at 4-Ohm RMS Power: <1 %
Speaker Level Inputs: Yes
Preamp Outputs: Yes
Built-In Crossovers: LP
Bass Boost: 0 or 12 dB
Frequency Response: 20-200 Hz
Signal to Noise Ratio: 100 dB
Advanced chassis with extruded aluminum heatsink
MOSFET class A/B power supply
Top-mounted controls
Switchable KickBass 12 dB bass boost at 40 Hz
80 Hz low-pass crossover with 24 dB/octave slope
Built-in 25 Hz subsonic filter
High level or low level inputs (125mV-10V)
PreAmp Signal Transfer (PAST) RCA outputs
Delayed turn-off logic circuit
Soft start turn-on circuit for reduced startup load
Short circuit, Over-voltage, Reverse polarity, Thermal overload (SORT) protection
2 -Year Techronics.com Warranty
Pioneer GM-7300M 800 Watts Monoblock Car Audio Amplifier800W Max, MonoBlock Amplifier
RMS Power Output: 4 ohms: 250 watts x 1 channels
RMS Power Output: 2 ohms: 360 watts x 1 channels
PWM Regulated MOSFET Power Supply
Screw-Type Speaker Terminals
Balanced Isolator Input Circuit
RCA Inputs
Speaker Level Input
Input Level Control
Built-in Crossover
Crossover Frequency Range: 40 Hz - 240 Hz
Bass Level Control: 50 Hz
Frequency Response: 10 Hz - 240 Hz
Dimensions: 11-13/16"L x 13-1/8"W x 2-3/8"H
1-tear Techronics.com warranty
Best answer:
Answer by skate82495
1 600watt so theres only 300 watts going to them that way they’ll last longer because 12” speakers have a trampoline effetc which over time can cause tearing if maxed out all the time.
Add your own answer in the comments!
100% Pure Garcinia Cambogia Extract – Appetite Suppressant – Carb Blocker Capsules – 2100 MG – 90 Caps
Looking for something special ? Find The Lowest Price HERE