Find The Lowest Price HERE

Best answer:

Answer by A. Nestoiter-Gravity
You can always find something more expensive, but this unit has more than enough power to run this your sub, plus as you read through description, you will find other features that make it a good choice

I deliberately found this amp even though it has more than 500rms watt of power at 1 ohm. All the research shows that these subs are hungry for energy. That’s why I select amps that have plenty of head room.

$ 140
Kenwood KAC-9105D-RB 1800W Max Class D Monoblock Performance Amplifier – Refurbished
Performance Series Class D Monoblock Car Amplifier
RMS Power Rating:
4 ohms: 500 watts x 1 chan.
2 ohms: 900 watts x 1 chan.
1 ohm: >900 watts x 1 chan.
Max power output: 1800 watts x 1 chan.
Digital amplifier technology
MOSFET power supply
Tuned Bass EQ (0-18 dB bass boost at 40 Hz)
Phase inverter (0°,180°)
Speaker-level inputs with signal sensing for automatic turn-on
Preamp RCA outputs
Line output terminals for extension
Short circuit, DC offset, overload, and thermal protection circuitry
Aluminum die cast heat sink
Built-in cooling fan
Gold-plated RCA level inputs
Gold-plated screw terminals
Variable low-pass filter (50-200 Hz, 24 dB/octave)
Single side exposure terminals for multi-installation
CEA-2006 compliant amplifier
Frequency response: 5-200 Hz

It’s a refurbished unit by the manufacturer, otherwise it’s like brand new, warranty and all. If you want this deal, grab it now because they probably have only one at this price.
For more info, call Techrnonics with your questions, they are nice people.

http://www.techronics.com/caraudio_15690_Kenwood-KAC-9105D-RB-1800W-Max-Class-D-Monoblock-Performance-Amplifier.html
+++

Just in case you want an amp with a stronger reputation, here is a link for you.

$ 200
Rockford Fosgate Prime R750-1D 750 watts RMS Mono subwoofer amplifier
mono subwoofer amplifier
400 watts RMS x 1 at 4 ohms
600 watts RMS x 1 at 2 ohms
750 watts RMS x 1 at 1 ohm
CEA-2006 compliant
variable low-pass filter (50-250 Hz, 12 dB/octave)
variable subsonic filter (15-40 Hz)
variable Punch bass boost (0-12 dB at 45 Hz)
optional wired remote Punch Level Control
Class-D amplifier design
MOSFET power and output stages
frequency response: 20-250 Hz
preamp-level inputs and outputs

As you know, Rockford bench test each amp before it leaves the factory. The actual performance of the amp is recorded on a certificate that comes with the amp. It’s always more watts than it is rated on the spec sheet. So with this amp, you will get AT LEAST 750rms watts at 1 ohm

http://www.techronics.com/caraudio_13248_Rockford-Fosgate-Prime-R750-1D-750-watts-RMS-Mono-subwoofer-amplifier.html
+++

$ 30
I also looked for a sealed enclosure for you. I don’t know the displacement volume of your sub, but here is one that is close to .65 as you requested. This one is 0.77. It’s for 10″ subs, so you would need to make a transfer plate with opening for your sub, and then glue and screw it on top of the opening on this enclosure.

Absolute SS-10 Single 10″ Sealed Subwoofer Enclosure
10″ Sealed Square Subwoofer Enclosure
Black carpet
Gold plated screw terminals (banana clip ready)
Mounting depth: 10-5/8″
Cutout diameter: 9-1/8″
Box volume: 0.77 cubic feet
Made from 3/4″ Medium Density Fiberboard (MDF)
Dimensions: 12″D x 12″W x 12″H
Authorized Internet Dealer

http://www.techronics.com/caraudio_14741_Absolute-SS-10-Single-10-inch-Sealed-Subwoofer-Enclosure.html

also 10″ will require transfer plate
http://www.crutchfield.com/p_777BB1050S/Sound-Ordnance-Bass-Bunker.html?tp=127

also 10″ and will require a transfer plate

http://www.crutchfield.com/p_777BB1075S/Sound-Ordnance-Bass-Bunker.html?tp=127

What do you think? Answer below!

100% Pure Garcinia Cambogia Extract – Appetite Suppressant – Carb Blocker Capsules – 2100 MG – 90 Caps